Product Information; Model Information; Firmware Revisions - GE C70 Instruction Manual
Capacitor bank protection and control system
Hide thumbs
Also See for C70:
- Instruction manual (708 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
PRODUCT INFORMATION
6.5 Product information
6.5.1 Model information
ACTUAL VALUES PRODUCT INFO MODEL INFORMATION
MODEL INFORMATION
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
The rear panel on the device contains similar information.
ETHERNET MAC ADDRESS
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is one
higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.
6
6.5.2 Firmware revisions
ACTUAL VALUES PRODUCT INFO FIRMWARE REVISIONS
FIRMWARE REVISIONS
6-22
ORDER CODE LINE 1:
C70-A00-AAA-A0A-A0A
SERIAL NUMBER:
ETHERNET MAC ADDRESS
000000000000
MANUFACTURING DATE:
0
OPERATING TIME:
0:00:00
PMU FEATURE ACTIVE:
No
CT/ VT ADVANCED DIAG
ACTIVE: No
LAST SETTING CHANGE:
1970/01/01 23:11:19
— UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
C70 Relay
REVISION: 7.3x
MODIFICATION FILE
NUMBER:
0
BOOT PROGRAM
REVISION: 7.01
FRONT PANEL PROGRAM
REVISION: 2.01
COMPILE DATE:
2013/09/15 04:55:16
BOOT DATE:
2013/09/15 16:41:32
FPGA PROGRAM:
REVISION: 01.05
FPGA DATA:
2013/09/15 16:41:32
C70 CAPACITOR BANK PROTECTION AND CONTROL SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: ACTUAL VALUES
Range: standard GE order code format (lines 1 to 4)
Range: standard GE serial number format
Range: standard Ethernet MAC address format
Range: YYYY/MM/DD HH:MM:SS
Range: operating time in HH:MM:SS
Range: Yes, No
Range: Yes, No
Range: YYYY/MM/DD HH:MM:SS
Range: 0.00 to 655.35
Revision number of the application firmware.
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
Range: 0.00 to 655.35
Revision number of the boot program firmware.
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
Range: YYYY/MM/DD HH:MM:SS
Date and time when product firmware was built.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the boot program was built.
Range: 0.00 to 655.35
Revision number for FPGA.
Range: YYYY/MM/DD HH:MM:SS
Date and time when the FPGA was built.
Advertisement
Table of Contents
