The Landtec System Gas Analyzer Manager (Lsgam) Software; Landtec System Online Users; Offline Users; Installation With The Cd Or Memory Stick - LANDTEC GEM5000 Operating Manual

F
Connector & Dust Cap
Dust Caps
LANDTEC
5K-MNL-GEM5000
5 The LANDTEC System Gas Analyzer Manager (LSGAM)
Software
LSGAM software is used to communicate with the GEM5000 and GEM2xxx family of instruments. This
allows a simple upgrade of information from older GEM2xxx instruments to the GEM5000 instruments.
Configuration Options
The GEM5000 instruments and LANDTEC System Gas Analyzer Manager (LSGAM) software can be
utilized in a number of ways:

Configured for operation with the LANDTEC System online service

Used offline as a local application storing information on the desktop/laptop computer

Use of the GEM5000 out of the box without software; (this does not allow the user to generate flow
rate values, select comments or select IDs with the instrument. This also prevents downloading of
readings to the computer.)

5.1 LANDTEC System Online Users

The procedures included in this section are intended for those who connect to the LANDTEC System
online service. The LANDTEC System is an online collaboration tool to Collect, Validate, Analyze, and
Communicate information based on field data obtained using LANDTEC instrumentation. LANDTEC offers
a variety of On-Line service subscription levels for LANDTEC System software.
If you are a currently registered user on the LANDTEC System, please log in at
http://www.landtecsystem.com/.
contacting LANDTEC in the US: (800) 821-0496 or International: +1 (909) 783-3636.
Online reference for using LANDTEC System Gas Analyzer Manager (LSGAM) with the LANDTEC
System can be found under the About
If you do not have login information please contact LANDTEC System Technical Support at +1 (909) 783-
3636 extension 6131. Alternatively, you may contact your local LANDTEC office for information on
connecting to the LANDTEC System online service.

5.2 Offline Users

The procedures included in the section describe use of the LANDTEC System Gas Analyzer Manager
(LSGAM) Software while NOT connected to the LANDTEC System online service.

5.3 Installation with the CD or memory stick

Reserved for future accessories that will
be developed.
Dust caps are used to protect the
connector points of the instrument.
If you are not currently using the LANDTEC System, you may register by
Help & Support menu within the LANDTEC System.
System Requirements

Windows XP, Vista, 7

Pentium 750MHz or faster

128MB RAM

200MB Hard Drive Space Available

CD-ROM Drive

Available USB port or bluetooth connection
GEM5000 Gas Analyzer
Page 23