Bluetooth On Windows Xp - LANDTEC GEM5000 Operating Manual

5K-MNL-GEM5000
A new icon will appear in the printers and devices window under the section Devices.
To verify the hardware configuration, you can goto device manager to see the
comport which it added as. To do this you will goto "Start" then in the seach box type in
devmgmt.msc
And press the
enter key or click on OK. Windows Device Manager will open
Navigate down the tree and expand the noted titled "Ports (COM & LPT).
You will see a "Standard Serial over Bluetooth link (COMxx)" entry in the list.
communications port which LSGAM will connect to your instrument. At this point LSGAM can be started
and should automatically connect. Refer to the section on

15.2.2 Bluetooth on Windows XP

To pair the GEM5000 to Windows XP first ensure the following:
2) The Bluetooth radio is turned on in your laptop or desktop computer. To ensure your computer is
seeing your Bluetooth radio verify this in Windows Device Manager.
a. Click on Start - Run - then type in devmgmt.msc and click on OK
Device Manager will open and you should see an item named "Bluetooth Raidos" towards
the top of the list.
If you do not see the Bluetooth Radios button you may not have your Bluetooth turned on.
If using a Bluetooth dongle you can unplug it and plug it back in. If using a laptop, there
may be a physical switch, keyboard shortcut, or other utility to turn the Bluetooth on and
off. Please toggle the Bluetooth off and then on again. The Device manager should refresh
and display the Bluetooth Radios menu item. If this doesn't resolve the Bluetooth
Page 134 Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
LSGAM Startup.
This will be the
V1.13