Units Of Measurement; Select By Route/Group (Requires Lsgam); Adjust Backlight; User Settings - LANDTEC GEM5000 Operating Manual

5K-MNL-GEM5000
2) Set the desired operating language for the gas analyzer by selecting the
appropriate function key. Choose from:
English
Spanish
French
French (This is planned as a future enhancement)
Italian
Portuguese
3) To exit this option, select the soft-key 'Exit' and the operator is returned to the
'User Settings' menu.
7.3.2

Units of measurement

Units of measure are controlled through the LSGAM Software and can
not be directly changed on the Analyzer. This protects from the potential
storing of different units of measure for the same project.
7.3.3

Select by route/group (requires LSGAM)

This is a future enhancement option to enable the operator to display IDs
by group or by specific route which have been uploaded from LANDTEC
System Gas Analyzer Manager (LSGAM) software to the instrument.
7.3.4

Adjust backlight

Page 66
—
Figure 16 Set Language
Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
V1.13