Id Setup; Creating Comments - LANDTEC GEM5000 Operating Manual

GEM5000 Gas Analyzer
5K-MNL-GEM5000
New Project...
Upon selecting you will be prompted to enter a Project Name and select from one of
three options.
Create a New Empty Project
This option creates a blank project where you configure all IDs and Comments. Alternately ID's can be
loaded from a file using the DataField CS version 3.4 ID file format.
Create a New Project with comments and site questions from a Current Project
Selecting this option allows the user to create a new project that will have the same Comments and Site
Questions as an existing project.
Create a New Project from the data in a GEM instrument
This option will create a New Project and automatically associate the IDs, Comments, and Site Questions
that exist in the connected portable instrument.

5.7.1 ID Setup

An ID represents a physical sampling point in the field. An ID can be allocated to field components such
as extraction wellheads, gas transmission lines, or passive monitoring probes. LSGAM allows users to
configure an ID for each sampling point in order to obtain accurate readings with LANDTEC portable
instrumentation
IDs are created, modified, and removed from the Project Setup tab in the software.

5.7.2 Creating Comments

Comments should be setup prior to creating new IDs. The user can define Comments that can be
associated with a reading in the portable instrument.
If you selected Create a New Project, when creating your project, you will need to click on the Create
Comments button. Comments can be entered in this setup screen or loaded from a text file and will be
displayed in the user interface. Comments can be 64 characters in length. "Notepad" or another text editor
can be used to create a file containing one comment per line up to 64 comments in total.
Page 30 Copyright LANDTEC North America, Inc. V1.13