Instrument Connection Points - LANDTEC GEM5000 Operating Manual

P Serial Number
Q Part Number
R Certification Number
Page 22
GEM5000 gas analyzer
S Recalibration Due

4.4 Instrument connection points

Top view:
Ref: Connection Point:
A Connector & Dust Cap
B
Inlet Port & Static Pressure Port
(White port)
C
Differential Pressure Port
(Blue port)
D
Connector & Dust Cap
E Gas Outlet Port
(Yellow port)
Unique identification for the instrument.
Verification of the serial number will be required if
Technical Support assistance is needed.
Manufacturer part number.
Displays instrument certification information.
Copyright LANDTEC North America, Inc.
The date displayed is the date the instrument
is due to be calibrated.
A B
—
Figure 3 Connection Points
Function:
Attach the USB cable for PC-to-
analyzer connectivity.
Attach the sample tube to take a gas sample.
Also used to measure the static pressure.
Attach the sample tube to measure
differential pressure.
Attach
taking readings.
Attach the wall charger to the analyzer
for charging.
The gas outlet port is the point at which
the sample gas is expelled. Tubing may
also be attached to the port.
C D E F
the temperature
V1.13
5K-MNL-GEM5000
probe while