LANDTEC GEM5000 Operating Manual page 42

5K-MNL-GEM5000
After the IDs are sent to the instrument, the instrument
Range of IDs
To Select A Range of IDs, place the mouse arrow at the edge of the first cell and hold down the left shift
key. Now click the last cell in the range.
__________________________________________________________________________________ As
with selecting specific IDs once the IDs are selected, they are moved to the Instrument side by "Drag &
Drop". The Instrument icon will appear with a red * and the ID's will need to be sent to the instrument.
Click on the Send to Instrument button _____________ to send these IDs to the instrument.
Selecting All IDs
All IDs can be selected by selecting one ID in the Project window and then pressing Ctrl-A.
Now move IDs from the Project Side to the Instrument Side by dragging and dropping them.
Page 42 Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
will appear without the red asterisk
The entire selected range will now be selected.
*
V1.13