Create A Project / Select A Project - LANDTEC GEM5000 Operating Manual

GEM5000 gas analyzer
Click on OK this will return you to the desktop and you will then need to click on the
shortcut again.
The GEM5000 must be connected to computer and turned ON. It must also be in the Gas Reading
screen. The LSGAM software will automatically download any information in the instrument including
readings, comments and IDs.
Note: Connection of instrument to computer should not be performed in a hazardous area.
A new instrument containing no information will display only the instrument information: Serial Number,
Version, Operating Mode, Instrument Date, Service Due Date, Number of IDs, Number of Readings,
Available Memory, and Battery Level.

5.7 Create a Project / Select a Project

Projects are a collection of Device IDs and their associated reading history. A project can be created
using LSGAM to contain a group of sequenced IDs and chronological history of instrument readings.
To create a Project, click on the Project menu and select New Project.
LANDTEC
5K-MNL-GEM5000
LSGAM
Page 29