LANDTEC GEM5000 Operating Manual page 25

NOTE: The computer may need administrative privileges to install the program. Program
may run on other versions of Windows but LANDTEC has not tested the program on older
versions of windows or with lesser processor and memory requirements.
As part of LANDTEC's continual improvement process, LANDTEC has consolidated its product
Page 24
GEM5000 gas analyzer
information and instrument communications software into one menu structure. On your memory stick or
CD you will find technical information, instrument communication software, USB cable drivers, videos and
instrument manuals.
To install the USB Cable Drivers and LSGAM (instrument communication software) from this media
format, you will need to place your CD or memory stick into your computer. If you have a CD it should
automatically start. If you have a memory stick, you may have to browse to it in your computer and then
click on the ClickHereToStart.htm icon. If you don't have a CD or memory stick, simply call LANDTEC's
technical support for internet links required to install the software.
Once the media opens, you should see the GEM5000 and GEM2000 instruments on the homepage.
Click on the GEM5000 instrument to open the LSGAM Software Setup.
From the setup screen you will see four buttons directly related to the GEM5000:

Step1 Communications Driver

Step2 Install LSGAM Software

5000 Manual

Instructional Videos
Note: Technically the communications drivers differ between the GEM2000 and GEM5000 instruments,
however, the driver package included with the 5000 instruments shipping after Nov 1, 2012
include drivers for both the GEM5000 and GEM-2000 instruments. The LSGAM software for the
GEM5000 is backwards compatible for the GEM2000 instruments.
The LSGAM software will automatically update if an internet connection is available when the software
starts. This software has been tested with Windows XP and Windows 7.
Copyright LANDTEC North America, Inc.
©
V1.13
5K-MNL-GEM5000