Restore To Factory - LANDTEC GEM5000 Operating Manual

5K-MNL-GEM5000
Once the Confirm button is pressed the gas mix will be deleted from the list and the first gas mix on the
screen will become the currently selected mix.

9.6.2 Restore to factory

This option will reset the gas analyzer to all of its factory programmed
settings and will clear ALL the user defined calibration points.
If in any doubt please contact Technical Support at +1 (909) 783-3636
or
1) Select the 'Menu' key.
2) Select soft-key 'Operation Settings'.
3) Select 'Key 2 - Gas Check'.
4) Select 'Key 3 - Restore to factory' followed by the soft-key 'Confirm' or 'Cancel'.
5) A validation message is displayed 'Reset user calibration?' Press the soft-key
'Confirm' to continue with the factory settings or soft-key 'Cancel' to cancel
the operation and return to the Gas Check menu.
Page 110
email: technical@landtecna.com.
Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
V1.13