User Settings; Operating Language - LANDTEC GEM5000 Operating Manual

GEM5000 gas analyzer
This option enables the operator to switch the 'GPS Navigation'
functionality on or off. (This is optional and dependent upon
purchasing the navigation option). The power on self-test screen will
display "GPS" in the enabled options screen if the analyzer has been
fitted with GPS
1) Select the 'Menu' key and the 'Device Settings' menu is displayed.
2) Select 'Key 5 – Navigation On' to switch on the GPS navigation functionality
or 'Key 5 – Navigation Off' to switch the GPS navigation functionality off.
Note: For further information please refer to section '8.0 – Taking Readings'.

7.3 User settings

To access the 'User settings' menu, select the 'Menu' key on the front of the analyzer to
display the 'Device Settings' menu followed by the soft-key to display 'User Settings'
menu. The following menu is displayed:
To exit the user settings menu select the soft-key 'Exit'.
7.3.1

Operating language

This option enables the operator to specify the operating language
displayed for the instrument.
1) Select 'Key 1 – Operating Language' and the following screen is displayed:
LANDTEC
—
Figure 15 User Settings Menu
5K-MNL-GEM5000
Page 65