Event Log - LANDTEC GEM5000 Operating Manual

GEM5000 gas analyzer
way of returning the instrument to factory settings, zeroing or carrying out a user
calibration as necessary for the relevant function.

12 Event log

The GEM5000 gas analyzer incorporates the facility to log significant events performed on
the analyzer via the 'Event Log'. This can be used as an aid to LANDTEC service staff as a
diagnostic tool.
Events are stored in the event log automatically. No user intervention is required. If the log
becomes almost full, a warning will be given on the start-up screen. If the log becomes full
then no further events will be stored.
At the present time, the log cannot be downloaded, viewed or cleared by the LANDTEC
System Gas Analyzer Manager.
Note: The event log cannot be viewed directly on the analyzer.
LANDTEC
5K-MNL-GEM5000
Page 113