GEM5000 Gas Analyzer
5K-MNL-GEM5000
The previous bubble will disappear and an additional bubble will appear indicating the GeoTech Virtual
Comp Port (COMxx) or LANDTEC Virtual Comp Port (COMxx) is installed successfully.
15.1.2 Windows XP
To install the serial drivers you will need to do the following:
Turn on the instrument without the USB cable plugged in. Wait for the self test to complete and press the
Next soft-key. On the instrument press the menu key. Then press the appropriate soft-key until you get
to the device settings menu. Press 3 for Device Information. Ensure the Comms is set to Legacy. If not,
press the soft-key Comms Mode. Press the Comms Mode soft-key until the Comms item is set to
Legacy.
Now the instrument is ready to accept serial communications.
Plug the USB cable into the instrument and computer. The "Found new hardware" wizard should open.
Choose the second option "install from a list or specific location (Advanced)" and click the Next
button.
Page 128
Copyright LANDTEC North America, Inc.
V1.13