Download Print this page
LANDTEC FPM-2680 Quick Start Manual

LANDTEC FPM-2680 Quick Start Manual

Digital fuel pressure meter

Advertisement

Quick Links

IMPORTANT:
No liability is accepted for incorrect use of
product.
Max Button
Display
3.
OPERATION
3.1 Battery Connection.
Note: Check the battery is 12VDC. Do Not use
with a 24V battery.
3.1 .1 Ensure the battery terminals are clean.
If necessary clean away any corrosion.
3.1.2 Clip the red (+) crocodile clip to the red
(+) terminal post on the battery.
3.1.3 Clip the black (-) crocodile clip to the
black (-) terminal post on the battery.
6
Test Clip
4
DIGITAL FUEL
PRESSURE METER
FPM-2680
This Digital Fuel Pressure meter
meter is small in size, light in weight, easy
to carry. Although complex and advanced, it
is convenient to use and operate. Its
ruggedness will allow many years of use if
proper operating techniques are followed.
Please read the following instructions
carefully and always keep this manual
within easy reach.
IMPORTANT
PLEASE READ THESE INSTRUCTIONS
C A R E F U L L Y . N O T E T H E S A F E
O P E R AT I O N A L R E Q U I R E M E N T S ,
WARNINGS, AND CAUTIONS.USE THIS
PRODUCT CORRECTLY, AND WITH
CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE, OR PERSONAL
INJURY, AND WILL INVALIDATE THE
WARRANTY.
pressure
!
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the FPM-2680 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LANDTEC FPM-2680

  • Page 1 DIGITAL FUEL PRESSURE METER FPM-2680 This Digital Fuel Pressure meter pressure meter is small in size, light in weight, easy to carry. Although complex and advanced, it is convenient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are followed.
  • Page 2 3.2 Test Clip Connection. 3.2.1 Connect the test clip to the SIGNAL wire from the fuel pressure sensor unit. Note: Refer to the owner’s handbook to ensure the correct wire is selected. 3.3 Usage. TABLE OF CONTENTS 3.3.1 By pushing and releasing the MAX button, the display will toggle between c u r r e n t p r e s s u r e r e a d i n g a n d t h e maximum pressure reading obtained.