LANDTEC GEM5000 Operating Manual page 32

5K-MNL-GEM5000
ID INFORMATION
Device ID: Must be eight (8) alphanumeric character spaces. (For example, ALFGW001)
Device Type:

Well: An active gas extraction well connected to a piping network which may require a flow rate
reading.

Sample Port: A sample point along a gas transmission line that may require a flow rate.

Probe: A passive gas migration monitoring probe that does not require a flow rate.
The GEM5000 calculates flow rate values specific to each device type (listed above). The available flow
devices programmed in GEM mode are listed below.
Page 32 Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
V1.13