Clear Readings - LANDTEC GEM5000 Operating Manual

5K-MNL-GEM5000
System which the download computer is configured for as (REMOTE) the readings will highlight in
a green color.

Local Project: If the readings were taken against a project that is setup on the computer as a
local project then they will highlight in a beige color.

Unknown Project: IDs in the instrument that do not match any of the Local or Remote projects
on the download computer. This is the result of uploading an instrument with IDs from one
computer but downloading on a different computer without the exact same project
configuration(s).

Duplicate Reading: This does not imply that the reading was taken twice. Rather it is an
indication that the reading was previously downloaded and exists on the computer in a different
readings file.
Placing your mouse over a reading will display additional parameters of the reading. As shown below on
the left, clicking on a reading will open a Reading details window and allow you to click through the
readings one-by-one in detail by clicking the Previous and Next buttons.

5.7.16 Clear Readings

To clear the readings from your instrument, after the readings are downloaded successfully, click the
Clear Instrument Readings button
deletion of the readings from the instrument.
This will clear information within the GEM and GA Mode simultaneously.
Note: Clicking yes will NOT check to ensure all data is saved from the instrument. If you plug in an
instrument and click the Clear Instrument Readings button without first performing a Get Readings
operation, data not previously downloaded will be lost!
Page 52 Copyright LANDTEC North America, Inc.
GEM5000 Gas Analyzer
. A prompt will verify the permanent
V1.13