Table of Contents
Advertisement
OMGEM5KN4.7.1
4.1.5
H
S filter (optional)
2
The GEM5000 gas analyzer has the capability to use an H
standard if the compensated CO cell is fitted and configured at the time the instrument is
manufactured. H
the H
S is removed from the gas sample, therefore providing a more accurate CO
2
reading.
The filter only needs to be used when you are trying to get rid of any possible cross gas
effects H
S might have on other gases. Do not use the filter on all boreholes.
2
4.1.6
Landtec Systems Gas Analyzer Manager – LSGAM (optional)
Landtec Systems Gas Analyzer Manager (LSGAM) enables the operator to maximize the
operation of the gas analyzer. It enables direct communication with the unit, features a
simple upload and download facility and is fully compatible with the latest Microsoft™
operating systems.
Features:
Organization and transfer of borehole IDs and readings to and from the gas
analyzer.
Configuration of the gas analyzer.
Flexible grouping of the IDs.
Structured organization of transferred data.
Automatic detection of instrument type and available options.
Secure data mode to prevent tampering.
First time set-up wizard.
Enable flow measurements for GEM5000 gas analyzers.
4.1.7
GPS (optional)
An optional GPS feature is available for the GEM5000 gas analyzer. It enables the site
engineer to automatically locate borehole IDs using GPS satellite signal from predefined
borehole IDs uploaded from LSGAM or set on the analyzer when out in the field prior to
taking a reading. The GPS reading data is stored for each measurement reading
providing an audit trail confirming that a reading was taken.
4.1.8
Bluetooth
The analyzers are fitted with a Bluetooth receiver which enables the operator to
download readings and upload IDs without the need to connect the analyzer to a PC via a
USB cable.
Page 12 of 70
S gas can have a cross-gas effect on the CO reading. By using a filter,
2
GEM5000 Gas Analyzer
S filter and is required as
2
Advertisement
Table of Contents
