LANDTEC GEM5000 Operating Manual page 10

atmospheric pressure and the output pressure should not exceed 40 in H
100 mbar) relative to atmospheric pressure.
For CSA (Canada) the 5000 series of gas analyzers are certified to Hazardous
Area Classification
CLASS 2258 03 - PROCESS CONTROL EQUIPMENT - Intrinsically Safe and Non-
Incendive Systems - For Hazardous Locations
Ex ib IIA:
Model GA 5000, GEM5000 and BIOGAS 5000 Methane Detectors; portable, battery
powered with non-field-replaceable Battery Pack P/N 20087; intrinsically safe and
providing intrinsically safe circuits ("[ib]" for Zone 1) to Model TP-5000 Temperature
Probe (Connector B) and with entity output parameters as tabulated below;
Temperature Code T1; 14 °F
Connector
Uo
(V)
B 5.0
C 10.0
Note: This device has been investigated for electrical safety features only.
For CSA (USA) the 5000 series of gas analyzers are certified to Hazardous Area
Classification
CLASS 2258 83 - PROCESS CONTROL EQUIPMENT - Intrinsically Safe and Non-
Incendive Systems – For Hazardous Locations - CERTIFIED TO U.S. STANDARDS
AEx ib IIA
Model GA 5000, GEM5000 and BIOGAS 5000 Methane Detectors; portable, battery
powered with non-field-replaceable Battery Pack P/N 20087; intrinsically safe and
providing intrinsically safe circuits ("[ib]" for Zone 1) to Model TP-5000 Temperature
Probe (Connector B) and with entity output parameters as tabulated below;
Temperature Code T1; 14 °F
Connector
Uo
(V
)
B 5.0
C 10.0
Note: This device has been investigated for electrical safety features only.
Page 10
GEM5000 gas analyzer
< <
Tamb. +122°F (-10 °C
Io Po
(mA (mW
) )
6 7
5 50
:
< <
Tamb. +122°F (-10 °C
Io Po
(mA (mW
) )
6 7
5 50
©
Copyright LANDTEC North America, Inc.
< <
Tamb. +50°C).
Entity Parameters
Co Lo
(uF (mH
) )
100 1000
100 1000
< <
Tamb. +50°C)
Entity Parameters
Co Lo
(uF (mH
) )
100 1000
100 1000
0 (+/-
2
Ci Li
(uF (mH
) )
0 0
0 0
Ci Li
(uF (mH
) )
0 0
0 0
V1.13
5K-MNL-GEM5000