Table of Contents
Advertisement
Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Optional front bezel
•
System cover
•
Optional optical drive
•
Air shroud
•
Cooling fans
•
Intrusion switch
•
Drive backplane
•
Drives
•
Cable routing
•
System memory
•
Processor and heat sink
•
Expansion cards and expansion card risers
•
Optional IDSDM module
•
MicroSD card
•
Optional BOSS S1 card
•
PERC
•
System battery
•
Optional internal USB card
•
Power supply unit
•
System board
•
Trusted Platform Module
•
Control panel
Safety instructions
CAUTION:
Ensure that two or more people lift the system horizontally from the box and place it on a flat
surface, rack lift, or into the rails.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of
electric shock.
WARNING:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE:
It is recommended that you always use an antistatic mat and antistatic strap while working on components inside
the system.
CAUTION:
To ensure proper operation and cooling, all system bays and fans must always be populated with a
component or a blank.
Installing and removing system components
5
21
Advertisement
Table of Contents
