Overview Of Replacing Components; Required Tools And Parts For Replacing Hardware Components On The Srx550 High Memory Services Gateway; Table 62: Tools And Parts Required For Replacing Services Gateway Hardware; Chapter 21 Overview Of Replacing Components - Juniper SRX550 Hardware Manual

CHAPTER 21

Overview of Replacing Components

Required Tools and Parts for Replacing Hardware Components on the SRX550 High
Memory Services Gateway
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Required Tools and Parts for Replacing Hardware Components on the SRX550 High
Memory Services Gateway on page 159
The tools and parts required for replacing various hardware components are listed in
Table 62 on page 159.
Table 62: Tools and Parts Required for Replacing Services Gateway
Hardware Components
Tool or Part
3/8 in. nut driver or pliers
Blank panels (if component is
not reinstalled)
Electrostatic bag or antistatic
mat
Electrostatic discharge (ESD)
grounding wrist strap
Flat-blade (–) screwdriver
Phillips (+) screwdrivers,
numbers 1 and 2
Wire cutters
Replacing the AC Power Supply on the SRX550 High Memory Services Gateway on
page 161
Components
Cables and connectors
Power supply
Mini-PIMs
GPIMs
Mini-PIMs
GPIMs
All
Cables and connectors
Cables and connectors
Blank panels
GPIMs
Mini-PIMs
Cables and connectors
159