Page 2
END USER LICENSE AGREEMENT The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at http://www.juniper.net/support/eula.html.
Page 4
Unpacking the Services Gateway ........65 Unpacking the SRX550 Services Gateway ....... 65 Verifying Parts Received with the SRX550 Services Gateway .
Page 5
SRX550 Services Gateway Grounding Specifications ..... . 77 Grounding the SRX550 Services Gateway ....... 78 Chapter 17 Connecting the SRX550 Services Gateway to External Devices .
Page 6
Gateway ............136 Resetting the SRX550 Services Gateway ....... 136 Juniper Networks Technical Assistance Center .
Page 10
Chapter 18 Providing Power to the SRX550 Services Gateway ....89 Figure 22: Connecting an AC Power Cord ....... . 90 Figure 23: Connecting an AC Power Cord on the SRX550 Services Gateway .
® To obtain the most current version of all Juniper Networks technical documentation, see the product documentation page on the Juniper Networks website at http://www.juniper.net/techpubs/ If the information in the latest release notes differs from the information in the documentation, follow the product Release Notes.
SRX550 Services Gateway Hardware Guide Table 1: Notice Icons Icon Meaning Description Informational note Indicates important features or instructions. Caution Indicates a situation that might result in loss of data or hardware damage. Warning Alerts you to the risk of personal injury or death.
We encourage you to provide feedback, comments, and suggestions so that we can improve the documentation. You can provide feedback by using either of the following methods: Online feedback rating system—On any page at the Juniper Networks Technical Documentation site at , simply click the http://www.juniper.net/techpubs/index.html...
7 days a week, 365 days a year. Self-Help Online Tools and Resources For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features: Find CSC offerings: http://www.juniper.net/customers/support/...
The services gateway provides cost-effective, scalable integration of routing, security, and other mid-range applications for these sites. The SRX550 Services Gateway has a modular 2U chassis that fits a 19-inch rack with a depth of approximately 18.1 inches.
SRX550 Services Gateway Hardware Guide SRX550 Services Gateway Software Features and Licenses on page 4 SRX550 Services Gateway Hardware Features The SRX550 Services Gateway provides the following features: Symmetric Multiprocessing-based data forwarding. Hardware-based control and data plane separation. Six on-board 10/100/1000Base-T Gigabit Ethernet ports.
Commit scripts Operation scripts Event policies Hot-swappable GPIMs and XPIMs are not hot-swappable on the SRX550 Services Gateway. Bypass ports LAN bypass ports are not supported on the SRX Series Services Gateways. Related SRX550 Services Gateway Description on page 3...
Voice over IP (VoIP) and IP phones and wireless access points. The PoE ports for the SRX550 Services Gateway reside on the individual XPIMs. The SRX550 Services Gateway supports the following XPIMs with PoE:...
SRX550 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 11 SRX550 Services Gateway Boot Devices and Dual-Root Partitioning Scheme By default, the SRX550 Services Gateway boots from the following storage media (in order of priority): Internal CompactFlash card (default; always present)
SRX550 Services Gateway Front Panel LEDs on page 17 SRX550 Services Gateway Back Panel on page 20 SRX550 Services Gateway Chassis The SRX550 Services Gateway chassis is a rigid sheet metal structure that houses all the other hardware components. Table 5 on page 13 provides information about the physical specifications for the services gateway.
General Electrical Safety Guidelines and Warnings on page 183 SRX550 Services Gateway Front Panel Figure 2 on page 14 shows the front panel of the SRX550 Services Gateway. Figure 2: SRX550 Services Gateway Front Panel Table 6 on page 14...
Page 33
Chapter 3: Chassis Description Table 6: SRX550 Services Gateway Front Panel Components (continued) Number Component Location Description AUX Port Left side of NOTE: The Auxiliary port is not supported on the front the SRX550 Services Gateway. chassis panel Electrostatic Left side of...
Page 34
SRX550 Services Gateway Hardware Guide Table 6: SRX550 Services Gateway Front Panel Components (continued) Number Component Location Description 6 fixed Gigabit Left side of The Gigabit Ethernet ports have the following Ethernet ports: the front characteristics: chassis panel, Port labeled Use an RJ-45 connector.
The mounting brackets are used to attach the services gateway to a rack or cabinet. Figure 3 on page 17 shows how the slots on the front panel of the SRX550 Services Gateway are numbered. Figure 3: SRX550 Services Gateway Slot Numbers...
SRX550 Services Gateway Hardware Guide Figure 4: SRX550 Services Gateway Front Panel LED Locations Table 7: SRX550 Services Gateway Front Panel LEDs Label State Color Description ALARM Amber Indicates a major alarm, such as low Services Processing Unit Steadily (SPU) memory (less than 10% remaining), session full, maximum number of VPN tunnels reached, high availability (HA) status changed, or redundant group member not found.
Page 37
Chapter 3: Chassis Description Table 7: SRX550 Services Gateway Front Panel LEDs (continued) Label State Color Description POWER Steadily Green The services gateway is functioning normally and that the services gateway and all power supply units (PSUs) are receiving power.
SRX550 Services Gateway. Figure 5: SRX550 Services Gateway Back Panel Table 8 on page 21 describes the components on the back panel of the SRX550 Services Gateway with reference to Figure 5 on page...
Chapter 3: Chassis Description Table 8: SRX550 Services Gateway Back Panel Components Number Component Location Description Usage Two power Left side of The power supply Power supplies are supply slots. back panel provides power to the hot-swappable and Each power...
SRX550 Services Gateway Hardware Guide Figure 6: SRX550 Services Gateway Slot Numbers CAUTION: SRX550 Services Gateway does not support hot-swappable functionality for GPIMs. For more information about supported GPIMs and the minimum supported Junos OS release, see SRX Series Services Gateway Interface Modules and Compatibility...
SRX Series Services Gateway Physical Interface Modules SRX550 Services Gateway Mini-Physical Interface Modules The SRX550 Services Gateway has two slots for installing Mini-Physical Interface Modules (Mini-PIMs). A Mini-PIM is a network interface card that is installed in the services gateway to provide physical connections to a LAN or WAN.
SRX550 Services Gateway Cooling System on page 27 SRX550 Services Gateway Cooling System The SRX550 Services Gateway cooling system consists of four fixed fans. The fans provide cooling to the components installed in the services gateway. To function properly, the entire cooling system requires an unobstructed airflow and proper clearance around the site.
SRX550 Services Gateway Power Supply on page 29 SRX550 Services Gateway Power Supply The SRX550 Services Gateway uses either one AC or one DC power supply unit (PSU). The services gateway is equipped with one AC power supply (see Figure 10 on page for non-power redundancy.
SRX550 Services Gateway Hardware Guide Figure 11: DC Power Supply The power supplies provide different output wattage to the services gateway components according to the voltage requirements of the components. The power supply components are listed in Table 9 on page...
Planning and Preparing the Site Site Preparation Checklist for the SRX550 Services Gateway on page 35 General Site Installation Guidelines for the SRX550 Services Gateway on page 37 SRX550 Services Gateway Environmental Specifications on page 38 Site Preparation Checklist for the SRX550 Services Gateway...
Page 54
SRX550 Services Gateway Hardware Guide Table 11: Site Preparation Checklist for SRX550 Services Gateway Installation (continued) Performed Item or Task Additional Information Date Notes Verify that “SRX550 Services Gateway environmental Environmental Specifications” on factors such as page 38 temperature and...
Documentation Installation Overview for the SRX550 Services Gateway on page 61 General Site Installation Guidelines for the SRX550 Services Gateway on page 37 General Site Installation Guidelines for the SRX550 Services Gateway The following precautions help you plan an acceptable operating environment for your...
Articles 110–16, 110–17, and 110–18 of the National Electrical Code, ANSI/NFPA 70. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Routine Maintenance Procedures for the SRX550 Services Gateway on page 125...
Rack-Mounting Requirements and Warnings on page 39 SRX550 Services Gateway Rack Size and Strength Requirements on page 43 SRX550 Services Gateway Spacing of Mounting Bracket and Flange Holes on page 43 Clearance Requirements for Airflow and Hardware Maintenance of the SRX550 Services...
Page 58
Les directives ci-dessous sont destinées à assurer la protection du personnel: Le rack sur lequel est monté le Juniper Networks services gateway doit être fixé à la structure du bâtiment. Si cette unité constitue la seule unité montée en casier, elle doit être placée dans le bas.
Le seguenti direttive vengono fornite per garantire la sicurezza personale: Il Juniper Networks services gateway deve essere installato in un telaio, il quale deve essere fissato alla struttura dell'edificio. Questa unità deve venire montata sul fondo del supporto, se si tratta dell'unica unità...
SRX550 Services Gateway Rack Size and Strength Requirements When installing the SRX550 Services Gateway in a rack, you must ensure that the rack complies with a 2U (19 in. or 45.6 cm) rack as defined in Cabinets, Racks, Panels, and...
Clearance Requirements for Airflow and Hardware Maintenance of the SRX550 Services Gateway When planning the installation site for the SRX550 Services Gateway, you need to allow sufficient clearance around the rack. When planning the installation site for the services gateway, consider the following: For the cooling system to function properly, the airflow around the chassis must be unrestricted.
SRX550 Services Gateway Cabinet Airflow Requirements on page 48 SRX550 Services Gateway Cabinet Size and Clearance Requirements You can install the SRX550 Services Gateway in a 19 in. (48.3 cm) cabinet as defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronic Industries Alliance ( http://www.ecaus.org/eia/site/index.html...
Gateway on page 44 SRX550 Services Gateway Cabinet Airflow Requirements When you mount the SRX550 Services Gateway in a cabinet, you must ensure that ventilation through the cabinet is sufficient to prevent overheating. Consider the following when planning for chassis cooling: Ensure that the cool air supply you provide through the cabinet can adequately dissipate the thermal output of the services gateway.
SRX550 Services Gateway Electrical Wiring Guidelines on page 49 SRX550 Services Gateway Supported AC Power Cords on page 50 SRX550 Services Gateway AC Power Supply Electrical Specifications on page 52 SRX550 Services Gateway DC Power Cable Specifications on page 52...
The addition of primary protectors is not sufficient protection to connect these interfaces metallically to OSP wiring. Related General Site Installation Guidelines for the SRX550 Services Gateway on page 37 Documentation Maintaining the SRX550 Services Gateway Power Supply on page 126...
Related SRX550 Services Gateway Power Supply on page 29 Documentation Clearance Requirements for Airflow and Hardware Maintenance of the SRX550 Services Gateway on page 44 SRX550 Services Gateway Electrical Wiring Guidelines on page 49 Site Preparation Checklist for the SRX550 Services Gateway on page 35...
SRX550 Services Gateway Hardware Guide SRX550 Services Gateway AC Power Supply Electrical Specifications The AC power supply electrical specifications for the SRX550 Services Gateway are listed in Table 16 on page Table 16: AC Power Supply Electrical Specifications for the SRX550...
SRX550 Services Gateway Electrical Wiring Guidelines on page 49 Site Preparation Checklist for the SRX550 Services Gateway on page 35 SRX550 Services Gateway DC Power Supply Electrical Specifications The DC power supply electrical specifications for the SRX550 Services Gateway are listed in Table 18 on page...
SRX550 Services Gateway Hardware Guide SRX550 Services Gateway Power Requirements The electrical and power requirements for the SRX550 Services Gateway include factors you must consider while planning the electrical wiring and power availability at your site. These requirements are covered in the following topics:...
Interface Cabling and Wiring Specifications for the SRX550 Services Gateway on page 55 RJ-45 Connector Pinouts for the SRX550 Services Gateway Ethernet Port on page 56 RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port on page 56 Interface Cabling and Wiring Specifications for the SRX550 Services Gateway The network interfaces supported on the services gateway accept different kinds of network cables.
Termination network Termination network Termination network Related RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port on page 56 Documentation Interface Cabling and Wiring Specifications for the SRX550 Services Gateway on page 55 RJ-45 Connector Pinouts for the SRX550 Services Gateway Console Port...
Installing the Services Gateway on page 71 Grounding the SRX550 Services Gateway on page 77 Connecting the SRX550 Services Gateway to External Devices on page 81 Providing Power to the SRX550 Services Gateway on page 89 Performing Initial Configuration on page 97...
CHAPTER 12 Installation Overview Installation Overview for the SRX550 Services Gateway on page 61 Required Tools and Parts for Installing the SRX550 Services Gateway on page 62 Installation Instructions Warning on page 62 SRX550 Services Gateway Autoinstallation Overview on page 63...
Electrostatic discharge (ESD) grounding wrist strap Related Installation Overview for the SRX550 Services Gateway on page 61 Documentation Installing the SRX550 Services Gateway in a Rack on page 71 SRX550 Services Gateway Safety Requirements, Warnings, and Guidelines on page 164 Installation Instructions Warning WARNING: Read the installation instructions before you connect the services gateway to a power source.
Installation Overview for the SRX550 Services Gateway on page 61 Documentation Required Tools and Parts for Installing the SRX550 Services Gateway on page 62 Grounding the SRX550 Services Gateway on page 78 SRX550 Services Gateway Basic Connectivity Overview on page 97...
Blank panels to cover any slots not occupied by a component The SRX550 Services Gateway is shipped in a cardboard carton and secured with foam packing material. The carton also contains an accessory box and quick start instructions. NOTE: The services gateway is maximally protected inside the cardboard carton.
Installing the Mounting Hardware Preparing the SRX550 Services Gateway for Rack-Mount Installation on page 69 Connecting the SRX550 Services Gateway to the Building Structure on page 70 Preparing the SRX550 Services Gateway for Rack-Mount Installation You can mount an SRX550 Services Gateway on four-post (telco) racks, enclosed cabinets, and open-frame racks.
SRX550 Services Gateway Hardware Guide Connecting the SRX550 Services Gateway to the Building Structure Always secure the rack in which you are installing the SRX550 Services Gateway to the structure of the building. If your geographical area is subject to earthquakes, bolt the rack to the floor.
Installing a DC Power Supply on the SRX550 Services Gateway on page 74 Installing the SRX550 Services Gateway in a Rack You can front-mount the SRX550 Services Gateway in a rack. Many types of racks are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame racks.
SRX550 Services Gateway Hardware Guide Figure 15: Installing the Rack Mount Brackets (Center Mount Position) Have one person grasp the sides of the services gateway, lift it, and position it in the rack. Align the bottom hole in each mounting bracket with a hole in each rack rail, making sure the chassis is level.
Documentation SRX550 Services Gateway Rack Size and Strength Requirements on page 43 SRX550 Services Gateway Spacing of Mounting Bracket and Flange Holes on page 43 Installing an AC Power Supply on the SRX550 Services Gateway To install an AC power supply: Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
SRX550 Services Gateway Hardware Guide Removing an AC Power Supply from the SRX550 Services Gateway on page 143 Connecting an AC Power Cord to the SRX550 Services Gateway on page 91 Installing a DC Power Supply on the SRX550 Services Gateway...
Dress the grounding cable and verify that it does not touch or block access to the services gateway components and that it does not drape where people could trip on Related Preventing Electrostatic Discharge Damage to the SRX550 Services Gateway on Documentation page 166...
Page 97
Powering On the SRX550 Services Gateway on page 94 Powering Off the SRX550 Services Gateway on page 95 Organizing Interface Cables on the SRX550 Services Gateway on page 81 SRX550 Services Gateway General Safety Guidelines and Warnings on page 163...
Connecting to the SRX550 Services Gateway from the CLI with the USB Console Port on page 82 Connecting the CLI at the User End for the SRX550 Services Gateway on page 85 Configuring the Modem at the SRX550 Services Gateway End on page 86...
Configuring the Modem at the SRX550 Services Gateway End on page 86 Connecting the CLI at the User End for the SRX550 Services Gateway on page 85 Connecting to the SRX550 Services Gateway from the CLI with the USB Console Port...
Page 101
Chapter 17: Connecting the SRX550 Services Gateway to External Devices Figure 21: Connecting to the USB Console Port on the SRX550 Services Gateway To connect to the CLI using a local management device through the USB console port on the services gateway:...
. No password is required at initial connection, but you must assign a root password before committing any configuration settings. Related Connecting to the SRX550 Services Gateway from the J-Web Interface on page 100 Documentation Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105...
Configuring the Modem at the SRX550 Services Gateway End Before you can connect a dial-up modem to the console port on the SRX550 Services Gateway, you must configure the modem to accept a call on the first ring and to accept DTR signals.
Do not mix AC and DC power supplies within the same services gateway because this can damage the device. A 645 W AC power supply with PoE support ships with the SRX550 Services Gateway. You connect AC power to the services gateway by attaching the power cord from the AC power source to the AC appliance inlet located on the power supply.
Do not mix AC and DC power supplies within the same services gateway. Damage to the device might occur. A 645 W DC power supply with PoE support is available for the SRX550 Services Gateway. WARNING: Before performing the following procedure, ensure that power is removed from the DC circuit.
Chapter 18: Providing Power to the SRX550 Services Gateway CAUTION: You must ensure that power connections maintain the proper polarity. The power source cables might be labeled to indicate (–) their polarity. There is no standard color coding for DC power cables. The...
Documentation page 166 Grounding the SRX550 Services Gateway on page 78 Organizing Interface Cables on the SRX550 Services Gateway on page 81 SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Powering On the SRX550 Services Gateway To power on the services gateway: Ensure that you have connected the power supply to the device.
Chapter 18: Providing Power to the SRX550 Services Gateway Related Connecting the SRX550 Services Gateway to the AC Power Source on page 89 Documentation Connecting the SRX550 Services Gateway to a DC Power Source on page 92 Grounding the SRX550 Services Gateway on page 78...
SRX550 Services Gateway Basic Connectivity Overview on page 97 SRX550 Services Gateway Basic Connectivity Settings on page 98 Connecting to the SRX550 Services Gateway from the J-Web Interface on page 100 SRX550 Services Gateway Secure Web Access Overview on page 102...
SRX550 Services Gateway Basic Connectivity Settings on page 98 Documentation Connecting to the SRX550 Services Gateway from the J-Web Interface on page 100 Connecting to the SRX550 Services Gateway from the CLI Locally on page 103 Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105...
Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105 Connecting to the SRX550 Services Gateway from the J-Web Interface To use the J-Web setup wizard to configure the SRX550 Services Gateway, you must connect through one of the built-in Ethernet management ports.
Chapter 19: Performing Initial Configuration Figure 25: Connecting to the Ethernet Port on the SRX550 Services Gateway From the management device (such as a desktop or laptop computer) that you use to access the J-Web interface, verify that the address of the port that you connect to...
Related Connecting to the SRX550 Services Gateway from the CLI Locally on page 103 Documentation Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105 SRX550 Services Gateway Secure Web Access Overview You can manage a services gateway remotely through the J-Web interface.
Configuring Basic Settings for the SRX550 Services Gateway with a Configuration Editor on page 112 Connecting to the SRX550 Services Gateway from the CLI Locally To use the CLI to configure the SRX550 Services Gateway, you must connect through the console port, as shown in Figure 27 on page 104.
SRX550 Services Gateway Hardware Guide Figure 27: Connecting to the Console Port on the SRX550 Services Gateway NOTE: Figure 27 on page 104 shows a connection to a local management device. A remote connection to the services gateway through a modem requires the cable and connector shown (RJ-45 to a DB-9 serial port adapter), along with an adapter for your modem, which you must purchase separately.
Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105 Connecting to the SRX550 Services Gateway from the CLI Remotely You can connect an SRX550 Services Gateway to the CLI from a remote location through two dial-up modems:...
SRX550 Services Gateway Hardware Guide Viewing Factory-Default Settings of the SRX550 Services Gateway To view the factory-default configuration of the services gateway using the CLI: Verify that the services gateway is powered on. Log in as the root user and provide your credentials.
Page 125
SRX240 Services Gateway. % vi srx240-poe-16xge-factory.conf The following sample output displays the factory-default configuration on an SRX240 Services Gateway: ## $Id: $ ## Copyright (c) 2009, Juniper Networks, Inc. ## All rights reserved. system { autoinstallation { delete-upon-commit; traceoptions { level verbose;...
Page 126
SRX550 Services Gateway Hardware Guide 208.67.220.220; syslog { archive size 100k files 3; interfaces { ge-0/0/0 { unit 0; ge-0/0/1 { unit 0 { family ethernet-switching { vlan { members vlan-trust; ge-0/0/2 { unit 0 { family ethernet-switching { vlan { members vlan-trust;...
Page 128
SRX550 Services Gateway Hardware Guide ge-0/0/12 { unit 0 { family ethernet-switching { vlan { members vlan-trust; ge-0/0/13 { unit 0 { family ethernet-switching { vlan { members vlan-trust; ge-0/0/14 { unit 0 { family ethernet-switching { vlan { members vlan-trust;...
Related SRX550-M Services Gateway Basic Connectivity Overview Documentation SRX550-M Services Gateway Autoinstallation Overview Configuring Basic Settings for the SRX550 Services Gateway with a Configuration Editor To establish basic connectivity on an SRX550 Services Gateway: Identify the services gateway. Connect it to the network.
Chapter 19: Performing Initial Configuration Table 31: Sample Settings on the SRX550 Services Gateway (continued) SRX550 Services Gateway Property Sample Value Domains to which the services gateway belongs lab.device.net device.net You can configure basic settings for the services gateway using either the J-Web setup wizard or CLI as the configuration editor.
Page 132
SRX550 Services Gateway Hardware Guide Table 32: Configuring Basic Settings (continued) Required or Using the J-Web Setup Task Optional Wizard Using the CLI Define the IP Optional From the Configure System: Set the default address of the Network Settings page, type gateway IP address default gateway.
Page 134
81 Displaying Basic Connectivity Configurations for the SRX550 Services Gateway To verify that the SRX550 Services Gateway has the settings you configured, you need to display the basic connectivity configurations. Because the basic connectivity settings appear in different places in the configuration hierarchy, displaying the entire configuration at once makes viewing the settings easier.
SRX550 Services Gateway Basic Connectivity Overview on page 97 Documentation Connecting to the SRX550 Services Gateway from the CLI Locally on page 103 Connecting to the SRX550 Services Gateway from the CLI Remotely on page 105 Connecting to the SRX550 Services Gateway from the J-Web Interface on page 100...
SRX550 Services Gateway Hardware Guide Table 33: Default Interface Configuration for the Services Gateway Security DHCP Port Label Interface Connector Zone State Address ge-0/0/0 RJ-45 Untrust Client Dynamically assigned NOTE: chassis clustering is enabled, use this port as management port (...
After the initial configuration is complete, you can attach the built-in Ethernet port that you are using for management purposes to the management network. Related Connecting to the SRX550 Services Gateway from the J-Web Interface on page 100 Documentation Connecting to the SRX550 Services Gateway from the CLI Locally on page 103...
SRX550 Services Gateway Basic Connectivity Overview on page 97 Management Access for the SRX550 Services Gateway Telnet allows you to connect to the SRX550 Services Gateway and access the CLI to execute commands from a remote system. Telnet connections are not encrypted and therefore can be intercepted.
CHAPTER 20 Maintaining Components Required Tools and Parts for Maintaining the SRX550 Services Gateway Hardware Components on page 125 Routine Maintenance Procedures for the SRX550 Services Gateway on page 125 Maintaining the SRX550 Services Gateway Cooling System Components on page 126...
SRX550 Services Gateway Hardware Guide Related Required Tools and Parts for Maintaining the SRX550 Services Gateway Hardware Documentation Components on page 125 Maintaining the SRX550 Services Gateway Cooling System Components on page 126 Maintaining the SRX550 Services Gateway Power Supply on page 126...
Gateway on page 130 Troubleshooting the Power System on the SRX550 Services Gateway on page 132 Using the RESET CONFIG Button on the SRX550 Services Gateway on page 135 Changing the RESET CONFIG Button Behavior on the SRX550 Services Gateway on page 136...
SRX550 Services Gateway Hardware Guide Troubleshooting with LEDs on the SRX550 Services Gateway The LEDs available on the services gateway display the status of various components. Table 36 on page 128 describes the LEDs on the chassis. Table 36: Component LEDs on the Services Gateway Chassis...
Related SRX550 Services Gateway Front Panel on page 14 Documentation Troubleshooting with the CLI on the SRX550 Services Gateway on page 127 Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 Services Gateway on page 130 Troubleshooting the Power System on the SRX550 Services Gateway on page 132...
SRX550 Services Gateway Hardware Guide Changing the RESET CONFIG Button Behavior on the SRX550 Services Gateway on page 136 Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 Services Gateway When the services gateway detects an alarm condition, it lights the red or yellow alarm LED on the front panel as appropriate.
Monitoring and Troubleshooting for Security Devices Troubleshooting the Power System on the SRX550 Services Gateway The LEDs on the services gateway enable you to determine the performance and operation of the power system. The POWER LED located on the front panel of the services gateway,...
Chapter 21: Troubleshooting Components Troubleshooting with LEDs on the SRX550 Services Gateway on page 128 Changing the RESET CONFIG Button Behavior on the SRX550 Services Gateway on page 136 Using the RESET CONFIG Button on the SRX550 Services Gateway If a configuration fails or denies management access to the services gateway, you can use the RESET CONFIG button to restore the services gateway to the factory default configuration or a rescue configuration.
Resetting the SRX550 Services Gateway on page 136 Resetting the SRX550 Services Gateway Use the RESET CONFIG button to return the SRX550 Services Gateway to either the rescue configuration or the factory default configuration. The button is recessed to prevent it from being pressed accidentally.
CHAPTER 22 Overview of Replacing Components Required Tools and Parts for Replacing Hardware Components on the SRX550 Services Gateway on page 141 Required Tools and Parts for Replacing Hardware Components on the SRX550 Services Gateway The tools and parts required for replacing various hardware components are listed in Table 40 on page 141.
Removing a DC Power Supply from the SRX550 Services Gateway on page 145 Replacing a DC Power Supply on the SRX550 Services Gateway on page 146 Removing a DC Power Supply Cable from the SRX550 Services Gateway on page 151 Removing an AC Power Supply from the SRX550 Services Gateway Up to two power supplies can be located at the rear of the chassis on the right side.
Required Tools and Parts for Replacing Hardware Components on the SRX550 Services Gateway on page 141 Disconnecting an AC Power Cord from the SRX550 Services Gateway on page 144 Installing an AC Power Supply on the SRX550 Services Gateway on page 73...
Chapter 23: Replacing Power System Components Installing an AC Power Supply on the SRX550 Services Gateway on page 73 Connecting an AC Power Cord to the SRX550 Services Gateway on page 91 Removing a DC Power Supply from the SRX550 Services Gateway Up to two power supplies can be installed at the rear of the chassis on the right side.
Gateway on page 141 Installing a DC Power Supply on the SRX550 Services Gateway on page 74 Removing a DC Power Supply Cable from the SRX550 Services Gateway on page 151 Replacing a DC Power Supply on the SRX550 Services Gateway You can replace the DC power supply on the SRX550 Services Gateway after disconnecting the power cord and removing the power supply already installed.
Chapter 23: Replacing Power System Components Removing a DC Power Supply from the SRX550 Services Gateway Up to two power supplies can be installed at the rear of the chassis on the right side. Each DC power supply weighs approximately 2 lb (1.29 kg).
SRX550 Services Gateway Hardware Guide Figure 30: Removing a DC Power Supply from the SRX550 Services Gateway Installing a DC Power Supply on the SRX550 Services Gateway To install a DC power supply: Ensure that the voltage across the DC power source cable leads is 0 V and that there is no chance that the cable leads might become active during installation.
Chapter 23: Replacing Power System Components Figure 31: Installing a DC Power Supply on an SRX550 Services Gateway Using both hands, slide the power supply straight into the chassis until the power supply is fully seated in the chassis slot. The power supply faceplate should be flush with any adjacent power supply faceplate.
SRX550 Services Gateway Hardware Guide Secure each power cable lug to the appropriate terminal with a screw. Apply between 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) of torque to each screw. Secure the positive (+) DC source power cable lug to the (return) terminal.
Preventing Electrostatic Discharge Damage to the SRX550 Services Gateway on Documentation page 166 Required Tools and Parts for Replacing Hardware Components on the SRX550 Services Gateway on page 141 Removing a DC Power Supply Cable from the SRX550 Services Gateway...
Page 170
Required Tools and Parts for Replacing Hardware Components on the SRX550 Services Gateway on page 141 Removing a DC Power Supply from the SRX550 Services Gateway on page 145 Installing a DC Power Supply on the SRX550 Services Gateway on page 74...
Contacting Customer Support Once you have located the serial numbers of the device or component, you can return the device or component for repair or replacement. For this, you need to contact Juniper Networks Technical Assistance Center (JTAC). You can contact JTAC 24 hours a day, 7 days a week, using any of the following methods: On the Web: Using the Case Manager link at http://www.juniper.net/support/...
Packing SRX550 Services Gateway Components for Shipment on page 158 Return Procedure for the SRX550 Services Gateway To return an SRX550 Services Gateway or component to Juniper Networks for repair or replacement: Determine the part number and serial number of the services gateway or component.
Page 173
Chapter 24: Contacting Customer Support and Returning Components Locating the SRX550 Services Gateway Chassis Serial Number and Agency Label The SRX550 Services Gateway serial number is located on the bottom of the device on the compliance/agency label. Related Return Procedure for the SRX550 Services Gateway on page 154...
Related Return Procedure for the SRX550 Services Gateway on page 154 Documentation Locating the SRX550 Services Gateway Chassis Serial Number and Agency Label on page 155 Information You Might Need to Supply to JTAC on page 156 Contacting Customer Support on page 153...
Chapter 24: Contacting Customer Support and Returning Components Required Tools and Parts for Packing the SRX550 Services Gateway To remove the components from the SRX550 Services Gateway or to remove the services gateway from a rack, you need the following tools and parts:...
Documentation Packing SRX550 Services Gateway Components for Shipment on page 158 Required Tools and Parts for Packing the SRX550 Services Gateway on page 157 Packing SRX550 Services Gateway Components for Shipment Follow these guidelines for packing and shipping individual components of the services...
CHAPTER 25 General Safety Guidelines and Warnings SRX550 Services Gateway Definition of Safety Warning Levels on page 161 SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 SRX550 Services Gateway Safety Requirements, Warnings, and Guidelines on page 164...
Avoid touching uninsulated electrical wires or terminals that have not been disconnected from their power source. Such an action could cause electrical shock. Related SRX550 Services Gateway Definition of Safety Warning Levels on page 161 Documentation Preventing Electrostatic Discharge Damage to the SRX550 Services Gateway on...
Documentation SRX550 Services Gateway Electrical Wiring Guidelines on page 49 Required Tools and Parts for Installing the SRX550 Services Gateway on page 62 Preparing the SRX550 Services Gateway for Rack-Mount Installation on page 69 General Site Installation Guidelines for the SRX550 Services Gateway on page 37...
Page 183
Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Preventing Electrostatic Discharge Damage to the SRX550 Services Gateway on page 166...
SRX550 Services Gateway Fire Safety Requirements and Fire Suppression Equipment on page 167 SRX550 Services Gateway Fire Safety Requirements and Fire Suppression Equipment In the event of a fire emergency involving devices and other network equipment, the safety of people is the primary concern. Establish procedures for protecting people in the event of a fire emergency, provide safety training, and properly provision fire control equipment and fire extinguishers.
Page 186
To keep warranties effective, do not use a dry chemical fire extinguisher to control a fire at or near a Juniper Networks services gateway. If a dry chemical fire extinguisher is used, the unit is no longer eligible for coverage under a service agreement.
Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Class 1 Laser Product Warning on page 170 Class 1 LED Product Warning on page 170...
Aviso Produto laser de classe 1. ¡Atención! Producto láser Clase I. Varning! Laserprodukt av klass 1. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation General Laser Safety Guidelines on page 169 Class 1 LED Product Warning on page 170...
Chapter 27: Laser and LED Safety Guidelines and Warnings Varning! Lysdiodprodukt av klass 1. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation General Laser Safety Guidelines on page 169 Class 1 Laser Product Warning on page 170...
Följ tillverkarens anvisningar vid kassering av använda batterier. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Jewelry Removal Warning on page 177 Lightning Activity Warning on page 176...
Varning! Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Battery Handling Warning on page 175 Jewelry Removal Warning on page 177...
Page 196
Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Battery Handling Warning on page 175 Lightning Activity Warning on page 176...
C). To prevent airflow restriction, allow at least 6 in. (15.2 cm) of clearance around the ventilation openings. Waarschuwing Om te voorkomen dat welke services gateway van de Juniper Networks services gateway dan ook oververhit raakt, dient u deze niet te bedienen op een plaats waar de maximale aanbevolen ο...
15,2 cm omkring ventilationsöppningarna. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Battery Handling Warning on page 175 Jewelry Removal Warning on page 177...
Page 199
Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets alla lagar och föreskrifter. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation Battery Handling Warning on page 175 Jewelry Removal Warning on page 177...
If possible, send another person to get medical aid. Otherwise, assess the condition of the victim, then call for help. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation General Electrical Safety Guidelines and Warnings on page 183...
The attached power cable is only for this product. Do not use the cable for another product. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation General Electrical Safety Guidelines and Warnings on page 183 In Case of Electrical Accident on page 183...
Page 204
SRX550 Services Gateway Hardware Guide DC Power Electrical Safety Guidelines The following electrical safety guidelines apply to a DC-powered services gateway: A DC-powered services gateway is equipped with a DC terminal block that is rated for the power requirements of a maximally configured services gateway. To supply sufficient power, terminate the DC input wiring on a facility DC source capable of supplying at least 65 A at –48 VDC for the system, or at least 48 A at –48 VDC for...
Page 206
SRX550 Services Gateway Hardware Guide interruptor automático en el panel que alimenta al circuito de corriente continua, cambiar el interruptor automático a la posición de Apagado (OFF), y sujetar con cinta la palanca del interruptor automático en posición de Apagado (OFF).
Page 208
SRX550 Services Gateway Hardware Guide ¡Atención! Wire a fonte de alimentação de DC Usando os talões apropriados na extremidade da fiação. Ao conectar a potência, a seqüência apropriada da fiação é moída para moer, +RTN a +RTN, então –48 V a –48 V. Ao desconectar a potência, a seqüência apropriada da fiação é...
Page 209
Storleken på dessa kontakter måste vara avpassad till ledningarna och måste kunna hålla både isoleringen och ledaren fastklämda. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation General Electrical Safety Guidelines and Warnings on page 183...
EN-61000-4-6 (2007) Immunity to Conducted Disturbances EN-61000-4-11 (2004) Voltage Dips and Sags Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation SRX550 Services Gateway Acoustic Noise Compliance Statements on page 194 SRX550 Services Gateway Acoustic Noise Compliance Statements The maximum emitted sound pressure level is 70 dB(A) or less per EN ISO 7779.
The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as defined in GR-1089-CORE. Related SRX550 Services Gateway General Safety Guidelines and Warnings on page 163 Documentation SRX550 Services Gateway Compliance Statements for EMC Requirements on page 194...