Gateway; Packing The Srx550 High Memory Services Gateway For Shipment - Juniper SRX550 Hardware Manual

Related
Documentation
Required Tools and Parts for Packing the SRX550 High Memory Services Gateway
Related
Documentation

Packing the SRX550 High Memory Services Gateway for Shipment

Copyright © 2016, Juniper Networks, Inc.
Configuration data displayed by one or more
Your name, organization name, telephone number, fax number, and shipping address
Return Procedure for the SRX550 High Memory Services Gateway on page 180
Locating the SRX550 High Memory Services Gateway Chassis Serial Number and
Agency Label on page 181
Locating the SRX550 High Memory Services Gateway Mini-PIM and GPIM Serial Number
Labels on page 181
Listing the SRX550 High Memory Services Gateway Component Serial Numbers with
the CLI on page 181
To remove the components from the SRX550 High Memory Services Gateway or to
remove the services gateway from a rack, you need the following tools and parts:
Blank panels to cover empty slots
Electrostatic bag or antistatic mat for each component
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade screwdriver, approximately 1/4 in. (6 mm)
Phillips (+) screwdrivers, numbers 1 and 2
Contacting Customer Support on page 179
Return Procedure for the SRX550 High Memory Services Gateway on page 180
Packing the SRX550 High Memory Services Gateway for Shipment on page 183
Packing SRX550 High Memory Services Gateway Components for Shipment on page 184
To pack the SRX550 High Memory Services Gateway for shipment:
Retrieve the shipping carton and packing materials in which the services gateway was
1.
originally shipped. If you do not have these materials, contact your Juniper Networks
representative about approved packaging materials.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect
2.
the strap to the ESD point on the chassis or to an outside ESD point if the device is
disconnected from earth ground. For more information about ESD, see
Electrostatic Discharge Damage to the SRX550 High Memory Services Gateway" on
page 194.
Chapter 25: Contacting Customer Support and Returning Components
commands
show
"Preventing
183