Juniper SRX550 Hardware Manual page 161

Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
set security zones security-zone trust interfaces t1-1/0/0.0 host-inbound-traffic
system-services all
For E1 interfaces:
set security zones security-zone trust interfaces e1-1/0/0.0 host-inbound-traffic
system-services all
For the 1-Port Serial Mini-PIM:
set security zones security-zone trust interfaces se-1/0/0.0 host-inbound-traffic
system-services all
Add or select security zones for host inbound traffic protocol options:
5.
For T1 interfaces:
set security zones security-zone trust interfaces t1-1/0/0.0 host-inbound-traffic protocols
all
For E1 interfaces:
set security zones security-zone trust interfaces e1-1/0/0.0 host-inbound-traffic protocols
all
For the 1-Port Serial Mini-PIM:
set security zones security-zone trust interfaces se-1/0/0.0 host-inbound-traffic protocols
all
Set security policies:
6.
set security policies default-policy permit-all
NOTE: You can use the CLI commands
to enable the 1-Port T1/E1 Mini-PIM to function as a T1 or an E1
e1–1/0/0
interface.
SRX550 High Memory Services Gateway Mini-Physical Interface Modules Overview
on page 31
1-Port Serial Mini-Physical (SRX-MP-1SERIAL-R) Interface Module on page 32
1-Port T1/E1 Mini-Physical (SRX-MP-1T1E1-R) Interface Module on page 34
Chapter 18: Performing Initial Configuration
or
set interfaces t1–1/0/0 set interfaces
139