Dc Power Electrical Safety Guidelines And Warnings - Juniper SRX550 Hardware Manual

Related
Documentation

DC Power Electrical Safety Guidelines and Warnings

Copyright © 2016, Juniper Networks, Inc.
When a services gateway is equipped with multiple AC power supplies, all power cords
(one for each power supply) must be unplugged to completely disconnect power to
the switch.
Note the following warnings printed on the label next to the power supplies:
"CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT
ALL POWER SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK."
"ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION.
AFIN DE PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON
D'ALIMENTATION AVANT DE FAIRE LE DÉPANNAGE."
Power Cable Warning (Japanese)
The preceding translates as follows:
WARNING: The attached power cable is only for this product. Do not use the
cable for another product.
SRX550 High Memory Services Gateway General Safety Guidelines and Warnings on
page 191
In Case of Electrical Accident on page 211
General Electrical Safety Guidelines and Warnings on page 211
DC Power Electrical Safety Guidelines and Warnings on page 213
When working with DC-powered equipment, observe the following guidelines and
warnings:
DC Power Electrical Safety Guidelines
DC Power Disconnection Warning
DC Power Grounding Requirements and Warning
DC Power Wiring Sequence Warning
DC Power Wiring Terminations Warning
DC Power Electrical Safety Guidelines
Chapter 30: Electrical Safety Guidelines and Warnings
213