Troubleshooting Components; Gateway; Chapter 20 Troubleshooting Components - Juniper SRX550 Hardware Manual

CHAPTER 20

Troubleshooting Components

Troubleshooting with the CLI on the SRX550 High Memory Services Gateway
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Troubleshooting with the CLI on the SRX550 High Memory Services Gateway on page 145
Troubleshooting with LEDs on the SRX550 High Memory Services Gateway on page 146
Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 High
Memory Services Gateway on page 148
Troubleshooting the Power System on the SRX550 High Memory Services
Gateway on page 150
Using the RESET CONFIG Button on the SRX550 High Memory Services
Gateway on page 153
Changing the RESET CONFIG Button Behavior on the SRX550 High Memory Services
Gateway on page 154
Resetting the SRX550 High Memory Services Gateway on page 154
Juniper Networks Technical Assistance Center on page 155
The Junos OS command-line interface (CLI) is the primary tool for controlling and
troubleshooting services gateway hardware, Junos OS, routing protocols, and network
connectivity. The CLI commands display information from routing tables, information
specific to routing protocols, and information about network connectivity derived from
the ping and trace route utilities.
You need to enter the CLI commands on one or more external management devices
connected to the services gateway to display the information.
SRX550 High Memory Services Gateway Front Panel on page 14
Troubleshooting with LEDs on the SRX550 High Memory Services Gateway on page 146
Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 High
Memory Services Gateway on page 148
Troubleshooting the Power System on the SRX550 High Memory Services Gateway
on page 150
Changing the RESET CONFIG Button Behavior on the SRX550 High Memory Services
Gateway on page 154
145