Input Menu - Christie LWU701i Operating Manual

INPUT menu

Select an item from the Input menu using the ▲/▼
cursor buttons, and press the ► cursor button or
ENTER button to execute the item. Then perform it
according to the following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
(continued on next page)
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Operating Guide
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó OFF
• This function works only for a video signal, component video signal (of
480i@60 or 576i@50 or 1080i@50/60), an HDMI
or 576i@50 or 1080i@50/60) and HDBaseT
576i@50 or 1080i@50/60).
• When TV or FILM is selected, the screen image is sharp. FILM
adapts to the 2-3 Pull-Down conversion system. But these may
cause a certain defect (for example, jagged line) of the picture for
a quick moving object. If this occurs, select OFF, even if the screen
image loses sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH ó MID ó LOW
• This function works only for a video signal, component video signal (of
480i@60 or 576i@50 or 1080i@50/60), an HDMI
or 576i@50 or 1080i@50/60) and HDBaseT
576i@50 or 1080i@50/60).
Using the ▲/▼ buttons switches the mode for color space.
AUTO ó RGB ó SMPTE240 ó REC709 ó REC601
• This item can be selected only for a computer signal (except for
signals from the LAN and HDBaseT ports).
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work correctly at some signals. If
this occurs, select a suitable mode except AUTO.
Description
69
INPUT menu
TM
signal (of 480i@60
TM
signal (of 480i@60 or
TM
signal (of 480i@60
TM
signal (of 480i@60 or
020-000786-02
LIT MAN USR D2