Introduction; Basic Information And Preparations; Instant Stack; Intellectual Stack And Simple Stack - Christie LW502 User Manual

1. Introduction

1.1 Basic information and preparations

Instant Stack

Instant Stack is a feature that allows you to superimpose images projected from
two projectors easily.

Intellectual Stack and Simple Stack

Instant Stack includes the following two features.
When two projectors are connected using an RS-232C cable with necessary
settings performed on the projectors, these two projectors automatically operate
in synchronization with each other according to the settings. This is known as
Intellectual Stack in this manual.
The two projectors operate individually without the RS-232C connection. This is
known as Simple Stack in this manual.

Remote control for Intellectual Stack and Simple Stack

For Intellectual Stack, one projector is set as Main and the other is set as Sub.
Only the Main projector can receive the remote control signals. Operate the projec-
tors from the control panel of the Main projector or with the remote control pointing
at the Main projector. For details on operating by remote control and from the control
panel, refer to
3.7 Important Information for Intellectual
For Simple Stack, both projectors can receive the remote control signals. To avoid
incorrect operations with the remote control, it is recommended to operate with
the control panel or a wired remote control. KEY LOCK or REMOTE ID * function
is also available.
* Available only in optional remote control.

Tentative terms for the two projectors

For better understanding of the descriptions in this
manual, the following terms are used when explaining
the vertical stacking installation.
Set A : Projector placed underneath
Set B : Projector placed on top of Set A
If you require more information on Instant Stack, consult your dealer.
(continued on next page)
LW502/LWU502/LX602 User's Manual - Instant Stack Guide
020-001085-02 Rev. 1 (02-2018)
(Operating Guide
Stack.
→
OPTION menu)
Set B
Set A
3