Download Data From The Monitor; Clear Memory - Nonin LS1 Operator's Manual

Data Output and Software

Download Data from the Monitor

NOTE: Data cannot be downloaded if there is a
medium or high priority alarm.
1. With the monitor on, but not connected to a patient,
connect a USB flash drive to the monitor.
2. In the "USB Flash Drive Detected" pop-up window,
Download Memory? displays.
3. Press OK to download data. Press Cancel to return to the
operating screen.
4. Once the data download is complete, the "Download
Memory Complete" pop-up window displays. See Clear
Memory.
If the USB drive is disconnected during the download, the
"USB Drive Failure" pop-up displays.

Clear Memory

This procedure deletes patient data recordings from the
monitor.
1. In the "Download Memory Complete" pop-up window, Clear
Memory? displays.
2. Press OK to clear memory.
3. In the "Clear Memory" pop-up window, Are you sure?
displays.
4. Press Yes.
5. Memory Cleared displays.
6. Press OK and remove USB flash drive.
7. Operating screen displays.
39