3. The trap is tilted in top first, then bottom. Press the moisture trap into position using the tab
(figure 2-C). There should be a tactile click and the moisture trap should be flush with the side
and back of the monitor.
4. To remove the moisture trap and replace the filter, use the tab to pull the moisture trap away
from the monitor. Remove the filter from the moisture trap. If the filter is not in the moisture
trap, check to see if it is still attached to the monitor.
A
PSG DAC Cables
Nonin's PSG DAC (Polysomnography Digital-to-Analog Converter) cables connect the monitor to a
polysomnograph to record data (EtCO
Refer to the individual PSG DAC cable instructions for use for more information.
Capno RTC Cable
Nonin's Capno RTC digital USB cable transmits real-time data from the monitor to another device
(e.g., computer).
Refer to the Capno RTC instructions for use for more information.
14
Figure 2. Replacing the Moisture Trap/Filter
, respiratory rate, SpO
2
System Components
, and CO
).
2
2
B
C