Displays and Controls
A standard LifeSense set-up consists of a monitor, single-use disposable moisture trap with
filters, Nonin-branded PureLight finger clip sensor (Model 8000AA), nasal cannula, and power
supply. See "Accessories" for information on optional accessories.
All operator settings are adjusted using the touch panel display on the monitor.
Monitor Front View
When the monitor is turned on, it displays the start-up screens (figure 1 and table 1) and then
the operating (figure 2 and table 2) and trend (figure 3 and table 3) screens. The following section
describes the icons on these screens as well as their functions.
2
1
4
3
5
6
Figure 1: Start-up Screens
8