Resource Configuration Add-In (Rca) Window - NEC LS2400 User Manual

Resource Configuration Add-in (RCA) Window

The RCA provides three major functions:
T
Creates representations of devices that cannot be
discovered by the system (ISA cards)
T
Modifies the contents of the system by adding and
removing devices
T
Modifies the resources used by devices.
You can use the RCA window to define an ISA card or add
an ISA card by clicking on the appropriate button.
Removing an ISA card requires that the card be highlighted
in the Devices section of the screen before clicking on the
button.
1. From the SSU main window, launch the RCA by
selecting the "Resources" task under the RCA heading in
the task box. Click OK.
2. When the RCA window appears, it displays messages
similar to the following:
Baseboard: System Board
PCI Card: Bus 00 dev 09 – - Multifunction Controller
PCI Card: Bus 00 dev 0A – - SCSI Controller
PCI Card: Bus 00 dev 0B – - Ethernet Controller
PCI Card: Bus 00 dev 0C – - VGA Controller
PCI Card: Bus 00 dev 0F – - Multifunction Controller
PCI Card: Bus 00 dev 10 -– Host Processor Bridge
PCI Card: Bus 00 dev 12 – - Host Processor Bridge
PCI Card: Bus 00 dev 13 – - Host Processor Bridge
PCI Card: Bus 00 dev 14 – - Host Processor Bridge
PCI Card: Bus 01 dev 09 – - Interrupt Controller
B-8 System Setup Utility