NEC LS2400 User Manual page 190

T
Power OFF - powers off the server. This option is not
allowed if the server is configured in RESTRICTED mode
for EMP operations.
T
Post-power-up option - sets the mode selection of the
server to EMP active or BIOS redirection. The setting is
available after the next power-up. The default selection
is EMP active.
T
Cancel - exits the dialog without any action taken.
T
Help - displays dialog level help information.
Reset
Selecting Reset from the Action menu generates the Reset
dialog so that you can remotely reset the server with post-
reset options.
Options available in the dialog are:
T
System Reset - resets the server with the selected post-
reset options. This operation is not allowed if the server
is configured in RESTRICTED mode for EMP operations.
T
Option Group - sets the post-reset option that will be
effective after reset. The options are EMP active or BIOS
redirection. The default selection is EMP active.
T
Cancel - exits the dialog without any action taken.
C-14 Emergency management Port Console
Reset Dialog