Power Supply; Peripheral Bays; Diskette Drive - NEC LS2400 User Manual

Power Supply

The 260 watt power supply is switch-selectable for 115 or
230 Vac at an operating frequency of 50/60 Hz. It is
designed to comply with existing emissions standards and
provides sufficient power for a fully loaded system
configuration. The power supply voltage selection switch is
factory set to 115Vac for systems used in the United States;
it is set to 230Vac for systems used in Europe.

Peripheral Bays

The system supports a variety of standard PC AT-
compatible peripheral devices. The chassis includes these
peripheral bays:
T
A 3.5-inch front panel bay for a 3.5" diskette drive
T
5.25-inch front panel bays for mounting 3 half-height
5.25-inch peripheral devices: tape drive, or CD ROM
drive (not a hard disk drive)
T
Internal hard disk drive bays for mounting four hard
disk drives.

Diskette Drive

The system includes a 3.5" diskette drive installed in a
front panel bay. The drive supports 720 KB and 1.44 MB
diskette media.
System Overview 1-5