NEC LS2400 User Manual page 95

Observe static precautions. Use an antistatic
wrist strap. Hold DIMMs only by their edges.
2. Holding the DIMM module only by the edges, remove it
from its antistatic package.
3. Position the DIMM so that the two notches in the bottom
edge of the DIMM align with the keyed socket.
4
3
2
1
Inserting Memory DIMMs
4. Insert the bottom edge of the DIMM into the socket, and
press down firmly on the DIMM until it seats correctly.
5. Gently push the plastic ejector levers on the socket ends
to the upright position.
6. Repeat the steps to install each DIMM.
7. Replace the left side panel and turn on the system.
! CAUTION
Upgrading Your System 4-19