Table of Contents
Advertisement
Chapter 2 Useful Features
4.3
Procedures for Using Configuration Utility
4.3.1
Create/add configuration
1.
Run LSI Software RAID Configuration Utility.
2.
From the TOP menu screen, select Virtual Drive Management, and then Create Configuration.
3.
For Select RAID Level on the following screen, select the RAID level (RAID0, RAID1).
4.
Create a virtual drive. The procedure for creating a new virtual drive is different from that for adding a
virtual drive. Creating a new virtual drive is to create a virtual drive by using a new physical device.
Adding a virtual drive is to create an additional virtual drive by using an unused area of the existing
Drive Group.
96
Run LSI Software RAID Configuration Utility
Create/add Virtual Drive
Check the Virtual Drive settings
Initialize the Virtual Drive
Install the OS and Universal RAID Utility*1
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
Express5800/B120g-h Maintenance Guide
4. RAID System Configuration
*1 This step is not required
if an virtual drive has
already been installed.
Advertisement
Table of Contents
