Table of Contents
Advertisement
Front Panel
The plastic front panel assembly is a one piece assembly.
The appropriate removable filler panels are attached to the
corresponding EMI shields. If you are installing peripheral
devices in the external bays above the 3.5-inch floppy disk
drive, you must remove the front cover along with the
corresponding filler panel and EMI shield.
Removing the Front Panel
Note: The front panel is secured
with six locking tabs.
1. Power off the system and remove the side panels as
described earlier in this chapter.
2. Remove the front panel by carefully puling it off the front
of the system chassis. Use an even amount of pressure
around the edges of the panel.
Upgrading Your System 4-33
Advertisement
Table of Contents
Troubleshooting
