NEC LS2400 User Manual page 189

T
Serial Line - must be filled out when the line selection is
set to Direct connect (Serial Line).

Baud Rate - must be 19200 for EMP to connect
properly.

COM Port No. - set the COM Port number to which
the null modem serial cable is connected.
T
Connect - initiates connection to the connected server.
When this button is clicked, you are prompted for the
EMP password.
T
Config - displays the Phonebook dialog.
T
Cancel - exits the Connect dialog without any action
taken.
T
Help - displays dialog level help information.
Power On/Off
Selecting Power On/Off from the Action menu allows you to
power the server on or off, with post-power-up options. It
generates the Power on/off dialog.
Options available in the dialog are:
T
Power ON - powers on the server.
Power On/Off Dialog
Emergency management Port Console C-13