Table of Contents
Advertisement
Multiboot Add-in (MBA) Window
The MBA lets you set the system boot priority. The boot
priority is the order the BIOS uses to boot the operating
system from various devices in your system.
To set the boot priority of your system:
1. From the SSU Main Menu, launch the MBA by selecting
the "Boot Devices" task under the MBA heading in the
task box. Click OK.
2. When the MBA window displays, the "Boot Device
Priority" window lists the current boot priority order.
The "Hard Drives" window lists the hard disk drive(s) in
your system. During bootup, BIOS searches the list of
device types shown in the "Boot Device Priority" list,
starting with the first device on the list. When BIOS gets
to Hard Drives, the BIOS tries each device shown in the
"Hard Drives" list, starting at the top of the list.
3. To change the priority of an entry in either list, select
the entry and click on the "Move UP" or "Move Down"
buttons.
4. Click on the Save button to save the boot priority.
5. Click on the Close button to return to the Main Menu.
Password Administration (PWA) Window
The PWA configures administrator and user passwords and
other security options.
1. From the SSU Main Menu, launch the PWA by selecting
the "Security" task under the PWA heading in the task
box. Click OK. The Security window displays.
2. Select the Administrator and User Password buttons to
change passwords.
B-16 System Setup Utility
Advertisement
Table of Contents
Troubleshooting
