Installation Procedure - Ricoh D127 Service Manual

Installation Procedure

1. Make two holes [A] through which the screws fasten the handset bracket to the main machine.
(Just penetrate with a screw driver)

You should detach the tray cover and make holes on it. Or you might damage the PSU.
2. Attach the handset bracket [B] to the side of the tray cover. (
3. Remove the label from the handset cradle [C].
4. Attach the cradle [C] to the handset bracket (
5. Reattach the label.
6. Set the handset on the cradle.
7. Connect the core attached handset cable to the "TEL" jack.
SM
x 2)
x 2).
2-11
Copier
D127/D128