Ricoh D127 Service Manual page 487

Equalizing the reduction ratio
among separated pages
7 (Page Separation)
0: Enabled
1: Disabled
Printer Switch 0F [SP No. 1-103-016]
No FUNCTION
Smoothing feature
Bit 1: 0 Bit 0: 0 = Disabled
0-1 Bit 1: 0 Bit 0: 1 = Disabled
Bit 1: 1 Bit 0: 0 = Enabled
Bit 1: 1 Bit 0: 1 = Not used
Duplex-Print Setting
2
0: Disabled / 1: Enabled
Stapling area setting for
3
Duplex-Print
4-7 Not used
SM Appendix
0: When page separation has taken place,
all the pages are reduced with the same
reduction ratio.
1: Only the last page is reduced to fit the
selected paper size when page separation
has taken place. Other pages are printed
without reduction.
COMMENTS
(0, 0) (0, 1): Disable smoothing if the machine
receives halftone images from other
manufacturers fax machines frequently.
This function is available only when the Duplex
unit is equipped.
This SW is disabled on Report/List-Output.
0: Left side area stapled
1: Upper side area stapled
Do not change the settings.
5-35
Bit Switches
D127/D128