Ricoh D127 Service Manual page 39

7. Remove the outer cap [H].

Do not remove the inner cap [I].
8. Load the bottle on the holder.

Do not forcefully turn the toner bottle on the holder. After you turn on the main power
switch, the copier sets the bottle in place.
9. Push the bottle holder back into the machine.
10. Press the latch [J] down to lock the holder.
11. Remove the tapes [K].
12. Remove the padding [L].
13. Pull each tabbed strip [M] out of the PCU with one hand, supporting the PCU with the other.

Do not pull both strips at the same time, as this could damage the PCU.
14. Close the front door.
SM 2-7
Copier
D127/D128