Ricoh D127 Service Manual page 334

Hide thumbs Also See for D127:

Table of Contents

System Service Mode

Initial Value of Upper Limit

Addr Book Migration (USB -> HDD)

This SP moves the address book data from the SD card or flash ROM on the

board to the HDD. You must cycle the machine off and on after executing this

1. Turn the machine off.

2. Install the HDD.

3. Turn the machine on.

4. Do SP5846 040.

5. Turn the machine off/on.

• Executing this SP overwrites any address book data already on the

HDD with the

data from the flash ROM on the controller board.

• We recommend that you back up all directory information to an SD

SP5846-051 before you execute this SP.

• After the address book data is copied to HDD, all the address book

deleted from the flash ROM. If the operation fails, the data is not

erased from the

Fill Adder Book A C L Info

This SP must be executed immediately after installation of an HDD unit in a

basic machine that previously had no HDD. The first time the machine is

powered on with the new HDD installed, the system automatically takes the

address book from the NVRAM and writes it onto the new HDD. However, the

new address book on the HDD can be accessed only by the system

administrator at this stage. Executing this SP by the service technician

immediately after power on grants full address book access to all users.

Chapters

Table of Contents