Copier
Installation Procedure
Make sure that the copier remains unplugged during installation.
1.
Remove the all strips of tape.
2.
Remove the bag, SMC, padding [A] and A3 sheet of paper [B] on the exposure glass.
3.
Fold the SMC and put it in the back of the front door.
Power supply cord is attached on the back of the main machine.
4. Open the front door [D].
5. Lift lever [E], press in on latch [F] and pull the bottle holder [G] out. (You do not need to pull it
completely out of the machine.)
6. Take a new bottle of toner, and shake it several times.
D127/D128
2-6
SM