Ricoh D127 Service Manual page 201

No.
Symptom
Definition
Mass erasing error (HDD erasing)
An error was detected before
HDD erasing when HDD/Data
875 B
erasing was executed.
(The case data erasing failed, or
The case HDD logic erasing
failed)
Log Data Error
An error was detected in the handling of the log data at power on or during
876
machine operation. This can be caused by switching the machine off while it is
operating.
-001 C Log Data Error 1
-002 C Log Data Error 2
-003 C Log Data Error 3
SM
Possible Cause/Countermeasure

Failed HDD logic erasing

Failed to erase the data each
module has
1. Reboot the machine

Damaged log data file in the
HDD
1. Initialize the HDD with
SP5832-004.

An encryption module not
installed
1. Disable the log encryption
setting with SP9730-004 ("0" is
off.)
2. Install the DESS module.

Invalid log encryption key due to
defective NVRAM data
1. Initialize the HDD with
SP5832-004.
2. Disable the log encryption
setting with SP9730-004 ("0" is
off.)
6-35
SC Tables
D127/D128