Ricoh D127 Service Manual page 432

Fax Error Codes
Code Meaning
Authorization Failed for
14-09
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-14 Security Locked File Error
14-15 Mail Data Error
Maximum Division Number
14-16
Error
14-17 Incorrect Ticket
14-18 Access to MCS File Error
D127/D128
Suggested Cause/Action

POP-Before-SMTP or SMTP authorization
failed.

Incorrect setting for file transfer

Number of broadcast addresses exceeded the
limit for the SMTP server.

The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.

Transmission was cancelled because the
detected size of the file was too large.

Processing is interrupted because the user
pressed Stop.

Update the software because of the defective
software.

The transmitting a mail is interrupted via DCS
due to the incorrect data.

Update the software because of the defective
software.

When a mail is divided for the mail
transmission and the division number of a mail
are more than the specified number, the mail
transmission is interrupted.

Update the software because of the defective
software.

Update the software because of the defective
software.

The access to MCS file is denied due to the no
permission of access.

Update the software because of the defective
software.
4-14 SM Appendix