Ricoh D127 Service Manual page 158

Using SP Mode
Cannot write module - Cause
36
other than E34, E35
Engine module download
40
failed
Operation panel module
42
download failed
Stamp data module
43
download failed
Controller module download
44
failed
Electronic confirmation check
50
failed
D127/D128
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct
update data then install again.
Replace the update data for the module on the
SD card and try again, or replace the BICU
board.
Replace the update data for the module on the
SD card and try again, or replace the LCDC.
Replace the update data for the module on the
SD card and try again, or replace the hard disks.
Replace the update data for the module on the
SD card and tray again, or replace controller
board.
SD update data is incorrect. The data on the SD
card is for another machine. Acquire correct
update data then install again.
5-10 SM