Ricoh D127 Service Manual page 469

System Switch 15 [SP No. 1-101-022]
No FUNCTION
0 Not used
Going into the Energy Saver
mode automatically
1
0: Enabled
1: Disabled
2-3 Not used
Interval for preventing the
machine from entering Energy
Saver mode if there is a
pending transmission file.
Bit 5: 0, Bit 4: 0
1 min
4-5
Bit 5: 0, Bit 4: 1
30 min1
Bit 5: 1, Bit 4: 0
1 hour
Bit 5: 1, Bit 4: 1
24 hours
6-7 Not used
System Switch 16 [SP No. 1-101-023]
No FUNCTION
0 Parallel Broadcasting
0: OFF
1: ON
1-7 Not used
SM Appendix
COMMENTS
Do not change the settings.
1: The machine will restart from the Energy Saver
mode quickly, because the +5V power supply is
active even in the Energy Saver mode.
Do not change these settings.
If there is a file waiting for transmission, the
machine does not go to Energy Saver mode
during the selected period.
After transmitting the file, if there is no file waiting
for transmission, the machine goes to the Energy
Saver mode.
Do not change
COMMENTS
1: The machine sends messages simultaneously
using all available ports during broadcasting.
Do not change these settings.
5-17
Bit Switches
D127/D128