Ricoh D127 Service Manual page 307

5417 Access Attack
Access Permissible Number
Sets a limit on access attempts when an excessive number of attempts are
001
detected for MFP features.
[0 to 500/100/1]
Attack Detect Time
Sets the length of time for monitoring the frequency of access to MFP
002
features.
[10 to 30/10/1 sec.]
Productivity Fall Wait
Sets the wait time to slow down the speed of certification when an excessive
003
number of access attempts have been detected.
[0 to 9/3/1 sec.]
Attack Max Num
Sets a limit on the number of requests received for certification in order to slow
004
down the certification speed when an excessive number of access attempts
have been detected.
[50 to 200/200/1 attempt]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has
been enabled.
Copy
Determines whether certification is required before a user can use the copy
applications.
001
[0 to 1/0/1]
0: On
1: Off
SM Appendix 3-51
System Service Mode
D127/D128