Ricoh D127 Service Manual page 410

System Service Mode
bit 3 DFU
bit 4 DFU
bit 5 DFU
bit 6 DFU
bit 7 DFU
1001 Bit Switch
004 Bit Switch 4 DFU
1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 Multiple copies if a paper size or type
mismatch occurs
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
bit 2 DFU
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4 Increase max number of the stored jobs
to 1000 jobs.
Enabled: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
D127/D128
0
Disabled
(single
copy)
Pattern3
Disable
(100)
3-154
- -
- -
- -
- -
- -
- -
1
- -
Enabled
(multiple)
- -
Pattern1
Enable
(1000)
- -
SM Appendix