Appendix 2 Error Messages - YOKOGAWA wt1600 User Manual

Appendix 2 Error Messages

Errors in communication command (100 to 199)
Code Message
102 Syntax error
103 Invalid separator
104 Data type error
108 Parameter not allowed
109 Missing parameter
111 Header separator error
112 Program mnemonic too long
113 Undefined header
114 Header suffix out of range
120 Numeric data error
123 Exponent too large
124 Too many digits
128 Numeric data not allowed
131 Invalid suffix
134 Suffix too long
138 Suffix not allowed
141 Invalid character data
144 Character data too long
148 Character data not allowed
150 String data error
151 Invalid string data
158 String data not allowed
161 Invalid block data
168 Block data not allowed
171 Invalid expression
178 Expression data not allowed
181 Invalid outside macro definition
App-2
Error messages related to communications are given below.
• The instrument allows error messages to be displayed in either Japanese or English,
however, they are shown only in English when they are displayed on a personal
computer.
• When servicing is required, contact your nearest YOKOGAWA representative.
• Only error messages relating to communications are given. For other error messages,
refer to the User's Manual IM 760101-01E.
Action
Incorrect syntax.
Insert a comma between data items to separate them.
Refer to pages 4-5 to 4-6 and enter using the correct
data format.
Check the number of parameters.
Enter required parameters.
Insert a space between header and data to separate them.
Check the mnemonic (a character string consisting of
letters and numbers).
Check the header.
Check the header.
Numeric value must be entered for <NRf> format.
Use a smaller exponent for <NR3> format.
Limit the number of digits to 255 or less.
Enter in a format other than <NRf> format.
Check the unit for <Voltage>, <Time> and <Frequency>.
Check the units for <Voltage>, <Time> and <Frequency>.
No units are allowed other than <Voltage>, <Time>
and <Frequency>.
Enter one of the character strings in {...|...|...}.
Check the character strings in {...|...|...}.
Enter in a format other than in {...|...|...}.
<Character string> must be enclosed by double quotation
marks or single quotation marks.
<Character string> is too long or contains characters
which cannot be used.
Enter in a data format other than <Character string>.
<Block data> is not allowed.
<Block data> is not allowed.
Equation is not allowed.
Equation is not allowed.
Does not conform to the macro function specified in IEEE488.2. —
Reference Page
Chapter 4, 5
4-1
4-5 to 4-6
4-5, Chapter 5
4-5, Chapter 5
4-1
Chapter 5
Chapter 5
Chapter 5
4-5
4-5, Chapter 5
4-5, Chapter 5
4-5, Chapter 5
4-5
4-5
4-5
Chapter 5
Chapter 5
Chapter 5
4-6
Chapter 5
Chapter 5
4-6, Chapter 5
4-6, Chapter 5
Chapter 5
Chapter 5
IM 760101-11E